Parts |
Products System |
Composition |
Specific Properties |
Processing Caption (brief) |
Car Body |
primer:KL-150 series |
epoxy resin.
alkyd resin.
amino resin.
special anti-rust pigment |
good adhesion to galvanized board steel sheet Al materials.
good properties in hardness.water proof wearproof.antirust.anti-impact.anti-chemical.and also with bendable property |
1. dilution with KL-150 for 20 ± 2S (25 ± 2 ℃ ) |
|
|
|
2.condition of baking:140 ℃× 30m |
middle coating:KL-150 series |
melamine resin.
alkyd resin.
modified resin etc. |
good properties of buffing.anti-stone-hit good adhesion to primer and top coat,thus could improve the chubbiness of top coat,and meanwhile could not decrease hardness of top coat. |
1、dilution with KL-150 for 20 ± 2S (25 ± 2 ℃ ) |
|
|
|
2、 condition of baking:140 ℃× 30m |
top coating KL-150 series (light color paint) |
top coating KL-150 series (light color paint) |
bright and chubby lacquer,high lustre clear reflection,exceedingly good in anti-bad climate,multiple physical and chemical property.deep coating could not easy to make pinhole and sag advangein processing. |
1. dilution with KL-150 for 20 ± 2S (25 ± 2 ℃ ) |
|
|
|
2. condition of baking:140 ℃× 30m |
Auto tyre |
top coating KL-150 series (flash paint varnish) |
flash paint:acrylic resin.CAB.melamine resin. |
exceedingly good in multiple properties,could be mist touched and mist sprayed coating.
bright and chubby lacquer and good adhesion on intercalation. |
1. dilution with KL-150,flash paint(15-17S) varnish (18-22S) |
|
varnish:melamine resin.modified resin and high solid acrylic resin |
|
2. varnish could be sprayed varnish after 5-10m surface drying of flash paint |
|
|
|
3. condition of baking:140 ℃× 30m |
KL-150 series |
aluminum paint: acrylic resin,CAB,aluminum powder. |
using aluminum paint assorted with coating varnish adopting the craft “ two coating one baking ” . |
1、 dilution with KL-150,flash paint(15-17S) varnish (18-22S) |
|
amino resin varnish:saturated polyester.amino resin acrylic resin |
|
2、
varnish could be sprayed varnish after 5-10m surface drying of flash paint |
|
|
|
3、
condition of baking:140 ℃× 30m |
Bumper |
KL-160 PP series |
PP chloride modified acrylic resin |
such primer has good adhesion property to untreated PP bottom materials and easy to buffing and also good property on covering and not impair the hardness of top coat. |
1. spray painting after dilution with KL-160 for 15 ± 2S |
|
|
|
2.
could be natural dry,surface dry ≤ 12H baking 60 ℃× 30m |
KL-888 two-component |
A:acrylic resin |
could be natural dry and also be dried in low temperatures good properties in clear reflection anti-bad climate and improving the chubbiness of lacquer |
1. the proportion of paint to curing anent is 6-8:1.spray painting after jlution of KL-888 for 18 ± 2S |
|
B:modified HDI |
|
2. could be natural dry surface dry ≤ 30m.
actual dry≤20H.
baking 6 0 ℃× 30m |
|
Automobile paint |
Page 2 |
|
|